Journal papers:
2023 [3]
[15] Azizi, S., Karami, K. and Mariani, S. (2023), “Full-field
modal analysis using video measurements and a blind source separation
methodology.”, Engineering Proceedings, 58(1), 105.
[14] Azizi, S., Karami, K. and Mariani, S. (2023), “Structural
identification by means of a digital image correlation technology.”, Engineering
Proceedings, 58(1), 65.
[13] Azizi, S., Karami, K. and Mariani, S.
(2023), “Vision-based structural identification using an enhanced phase-based
method.”, Engineering Proceedings, 58(1), 62.2021 [2]
[12]
Karami, K., and Ahmadi, H. (2021), “Torsional control of asymmetric
buildings using online 3-D damage detection and adaptive stiffness devices”, Structural
Control and Health Monitoring, 28(10), e2804.
[11] Azizi, S., Karami, K., and Nagarajaiah, S. (2021),
“Developing a semi-active adjustable stiffness device using integrated damage
tracking and adaptive stiffness mechanism”, Engineering Structures, , 238,
112036.
2020 [3] [10] Karami, K., Fatehi, P. and Hoseini, A. (2020),
“Subspace based identification of structural
parameters of the base isolation level”, Amirkabir Journal of Civil Engineering, 53(12), 1-3. 10.22060/ceej.2020.18784.6961.
[9] Sourni, S., Batmani, Y. and Karami, K.
(2020), “Seismic motion control of structures using an adaptive optimal
model-free controller”, Journal of Vibration and Control, 27(19-20), 2368-84.
[8] Karami, K., Fatehi, P. and Yazdani, A. (2020),
“On-line system identification of structures using wavelet-Hilbert transform and sparse component analysis”, Computer-Aided
Civil and Infrastructure Engineering, 10.1111/mice.12552.
2019 [2]
[7] Manie, S., Karami, K. and Fatehi, P.
(2019), “Online system identification in smart structures using wavelet
transform based sparse component analysis”, Amirkabir Journal of Civil
Engineering, 52(9), 12-12. 10.22060/ceej.2019.16145.6140.
[6] Karami, K., Manie, S.,Ghafouri, Kh. and Nagarajaiah, S. (2019),
“Nonlinear structural control using integrated DDA/ISMP and semi-active tuned mass damper”, Engineering Structures, 181C, 589-604.
2016 [2]
[5] Karami, K., Nagarajaiah, S. and Amini, F. (2016),
“Developing a smart structure using integrated DDA/ISMP and semi-active
variable stiffness device”, Smart
Structures and Systems, 18(5), 955-982.
2012 [2]
[3] Karami, K. and Amini, F.
(2012), “Decreasing the
damage in smart structures using integrated online DDA/ISMP and semi-active
control”, Smart
Materials and Structures,
21, 105017.
[2] Amini, F. and Karami, K. (2012),
“Damage detection
algorithm based on identified system Markov parameters (DDA/ISMP) in building
structures with limited sensors”, Smart
Materials and Structures, 21, 055010.
2011 [1]
[1] Amini,F. and
Karami, K. (2011), “Capacity design by developed pole placement
structural control ”, Structural Engineering and Mechanics,
39(1),147-168.
Conference papers:
2023 [1]
[19] Karami, K., Amiri, K. and Fatehi, P. (2023),
“Identification of structural systems using the development of the single
source point method in the sparse component analysis.”, 13th International
Congress on Civil Engineering, Tehran. P8.(In Persian).2022 [1]
[18]
Azizi, S. and Karami, K. (2022), “Vision based modal Identification of
structures using phase extraction and linearization”, 13th National
Congress on Civil Engineering, Isfahan. P7.(In Persian).
2021 [2]
[17] Fatehi, P., Karami, K. and Zandsalimi, K.
(2021), “3D Identification of torsional modes of structural systems using
sparse component analysis based on the Hilbert-Wavelet transform”, 12th
International Congress on Civil Engineering, Mashhad. P9.(In Persian).
[16] Azizi, S., Karami, K. and Zandsalimi, K.
(2021), “Blind modal Identification of vibrating structures by imaging using
the extracted phase”, 12th International Congress on Civil
Engineering, Mashhad. P9.(In Persian).
2020 [2]
[15] Naderi, S., Karami, K. and Batmani, Y. (2020),
“Real time damage detection in building structures using model-based adaptive
control approach”, 12th National Congress on Civil Engineering,
Tabriz. P9.(In Persian).
[14] Karami, K. and Karimi, F. (2020), “System
identification of the non-classical damping structures using sparse component
analysis”, 12th National Congress on Civil Engineering, Tabriz.
P10.(In Persian).
2018 [4]
[13] Karami, K. and Shafiee, A. (2018),
“Determining mid-story isolation parameters in control of structures”, 11th
International Congress on Civil Engineering, Tehran. P8.(In Persian).
[12] Karami, K., Yazdani,A. and Fatehi, P. (2018), “Structural
identification using sparse components analysis and Hilbert transform to reduce
existing disturbances”, 11th International Congress on Civil
Engineering, Tehran. P8.(In Persian).
[11] Karami, K. and Azizi, S. (2018), “Semi-active seismic control of
damaged structures using a combination of health monitoring and negative
stiffness device”, 11th International Congress on Civil
Engineering, Tehran. P8.(In Persian).
[10] Karami, K. and Adabi, F. (2018), “Smart control of adjacent
building structures using structural health monitoring”, 11th
International Congress on Civil Engineering, Tehran. P8.(In Persian).
2016 [3]
[9] Karami, K. and Ahmadi, H. (2016), “Torsional
control of tall buildings using integrated real time damage detection and
semi-active variable stiffness device”, 9th National Congress on
Civil Engineering, Mashhad. P10.(In Persian).
[8] Mohammadi- KaniSavaran, A., Yazdani, A. and Karami.
K. (2016), “Estimation of the period and deflection amplification factor
for steel structures using Bayesian approach”, 9th National
Congress on Civil Engineering, Mashhad. P9.(In Persian).
[7] Manie, S., Karami. K. and Ghafouri, KH. (2016),
“Damage control of smart structures using integrated real time damage detection
and variable stiffness TMD”, 9th National Congress on Civil
Engineering, Mashhad. P8.(In Persian).
2015 [2]
[6] Mohammadi- KaniSavaran, A., Yazdani, A. and Karami.
K. (2015), “Updating deflection amplification factor for moment resisting
steel frame structures using Bayesian approach”, 3rd International Congress
on Civil Engineering, Architecture & Urban development, Tehran. P10.(In
Persian).
[5] Karami, K. and AkbarAbadi, SH. (2015), “Decreasing
the damage in smart isolated structures using integrated structural health
monitoring and semi-active control”, 4th National Conference on
New Materials & Structures in Civil Engineering, Yasuj. P10.(In
Persian).
[4] Karami, K. and Ahmadi, H. (2015), “A new damage
detection method based on Identified system Markov parameters in 3d structures”,
4th National Conference on New Materials & Structures in
Civil Engineering,Yasuj. P10.(In Persian).
2009 [1]
[3] Amini, F. and Karami, K. (2009), “Optimal
Placement of Semi-Active Control Devices Based on Capacity Diagram in Elastic
Zone using Genetic algorithm”, the 8th International Congress on Civil
Engineering, Shiraz. 328-336.(In Persian).
2008 [2]
[2] Karami, K., Holakoo, A., Mahmoodpour, A. and
Zandsalimi, K. (2008), “Assessing influences of Openings in Diaphragm
Rigidity”, the 14th National Conference of Civil engineering Students,
Semnan. 58-64.(In Persian).
[1] Mahmoodpour, A. and Karami, K. (2008),
“Determining Lower Bound of Ultimate Load in Cracked Plate Using Decreasing Module
of Elasticity”, the 14th National Conference of Civil engineering Students,
Semnan. 94-100.(In Persian).
|